Имя | Err Ian |
Контакты | Доступны бесплатно после регистрации или входа |
Общая информация
|
Город проживания | Актау |
Заработная плата | от 150 000 тнг. |
График работы | Полный рабочий день / Сменный график / Подработка / Удаленная работа / Вахтовый метод работы |
Образование |
Высшее |
Опыт работы | 10 лет 1 месяц |
Пол | Мужской |
Возраст | 41 год (2 апреля 1983) |
Опыт работы
|
Период работы | июнь 2013 — июль 2016 (3 года 2 месяца) |
Должность | Civil Engineer |
Компания | AL Joaib Consulting Engineering Saudi Arabia |
Обязанности | Bridge Inspection - Ministry of Transportation Projects
Inspect bridges, culverts and waterways to detect damage.
Ensure structures conform to safety regulations, bridge and building codes.
Inspect waterways to determine need for cleaning, straightening or
enlargement.
Inspect Bridges, culverts and waterways to detect cracks in concrete or signs
of settlement.
Verifies alignment of bridge with road track, using levels and similar gauging
instruments.
Observes installation of guardrails on bridges to ensure construction
according to specifications.
Determines need for repainting structures to prevent rust or excessive
weathering.
Inspect piles, post to determine if decayed, split or crooked.
Inspects bolts and rivets at joint of floor beams, stringers and panel points to
ensure they are securely fastened.
Analyze Non-destructive testing (NDT) results.
Inspects steel girders to detect from rust and buckling.
Inspects drainage system to detect obstructions.
Prepares reports of findings, noting locations and type of structure, defects
and extent of damage.
RIC O&M Department & RC Facilities - Jubail Royal Commission Project
Prepare and submit request for quotation to suppliers and contractors for
cost and budgets references.
Computes total quantity of material estimation for Architectural, Structural
and Civil works.
Prepare estimate by assembling and displaying numerical and descriptive
information.
Identifies labor, material and time requirement by studying proposals,
drawings, specifications and related documents.
Computes cost by analyzing labor, material and time requirements.
Prepare construction methodology, scope of works and measurements for
payments.
Prepare documents that require for submission.
Perform other engineering duties as per manager advised.
Al-Jouf Center Mall Project
Examine the material to ensure that it is viable for the health of the
environment and its quality and usability.
Analyze structural and architectural drawings for approvals.
Analyze structural analysis report for approval of the project structure to
ensure the life safety and design criteria, design materials, loadings are in
compliance with the applicable Structural Codes and Standards.
Ensure the contractors fulfills all the conditions outlined in the contract
documents.
Ensure deadlines and cost targets are met.
Prepare monthly/weekly percentage report for the item of work done and
delays to the client’s owner.
Prepare monthly/weekly percentage of the total project.
Prepare monthly/weekly total estimated quantity item of work done of the
project.
Interface with client’s owner and prepare repair estimates.
Provide client’s owner new struc |
|
Период работы | январь 2012 — январь 2013 (1 год 1 месяц) |
Должность | Structural Engineer |
Компания | E.M. Cuerpo Inc. Philippines |
Обязанности | Take responsibility for engineering tasks, and perform associated calculation
and analysis using governing code & standard with the help of Structural
Analysis & Design Computer Program or manual calculation if needed.
Provide drawings for own designs and produce sketches or cad drawings to
incorporate in drawing by drafter or with the help of the Architect.
Examining structures at risk of collapse and advising how to improve their
structural integrity, such as recommending removal or repair of defective
parts and any substitutes/remedies for the structures.
Apply value engineering in designing structures.
Prepare construction methodology for a project.
Review shop drawings done by co prior to implementation.
Coordinates work with other disciplines such as Architect, Electrical, Sanitary
& etc.
Coordinates with drawing & detailing with other engineering disciplines
which includes reviewing drawing produce by other disciplines to assure the
interface is correct and that interference are avoided.
Prepare rough materials take off for bidding purposes.
Conduct site inspection on designed projects to ensure plans and
specification are met.
Perform other engineering duties as advised under supervision of assigned. |
|
Период работы | май 2010 — март 2011 (11 месяцев) |
Должность | Structural Engineer |
Компания | Red Sea Housing Services U.A.E & Ghana |
Обязанности | In charge in all structural design & analysis.
Review and examines complex plans & specifications to determine if they
comply with life safety & public access provisions of city and national
construction codes.
Perform engineering computation to analyze structural members &
assemblies for structural integrity & compliance with applicable construction
codes.
Identifies inadequacies found on structural documents & specification &
requires corrections to be made to meet the requirements of city codes.
Responds to questions related to construction codes, department policies
and procedures which are submitted by the public.
Applying expert knowledge of the forces that act on various structures.
Using computer-aided design (Cad) technology for simulation purposes.
Present & submit detailed Structural design drawing using AutoCAD. |
|
Период работы | сентябрь 2008 — апрель 2010 (1 год 8 месяцев) |
Должность | Structural Engineer |
Компания | Commonwealth Engineers Co., Ltd. Japan |
Обязанности | Checks and analyze structural loadings such as the dead load, live load, wind
load, seismic load, piping system load, cable tray load, impact load, thermal
load, and bundle pull load & etc.
Prepares design loading staad inputs for the MHI design team.
Identifies and prepare structural joint & member specification for the MHI
design team such as member to be release in moment, member to be
considered as truss, master/slave specification & etc.
Performed other miscellaneous duties as requested.
In-charge for analysis and design for other projects. |
|
Период работы | май 2008 — сентябрь 2008 (5 месяцев) |
Должность | Structural Designer |
Компания | ArchEn Technologies Inc. (a San Miguel Company) Philippines |
Обязанности | Perform structural design and analysis calculation using governing codes and
standards, engineering formulas, skills and experience.
Layout and detail portions of projects using schematic layout by Project
Engineer. May be assigned responsibility for schematic or conceptual layouts
when qualified.
Provide drawings for own designs and produce sketches to incorporate in
drawing by drafters.
Research design options and document findings for Project Lead Engineer.
Review shop drawings.
Coordinates work with other disciplines such as Architectural, Mechanical,
Electrical and etc.
Coordinates with detailing in other engineering disciplines which include
reviewing drawings produced by other disciplines to assure that interface is
correct and that interferences are avoided.
Performs other miscellaneous duties as requested. |
|
Период работы | сентябрь 2006 — сентябрь 2007 (1 год 1 месяц) |
Должность | Surveyor |
Компания | J.A. Jones International (a Fluor Company), Haiti |
Обязанности | Supervise local survey crew, ensuring they fulfill their potential.
Planning and overseeing land/building works.
Ensuring works were done timely supporting construction activities.
In-charge of all data, and checking all designed plans.
Control excavation and embankment.
In-charge in site grading preparation.
In-charge in vertical and horizontal alignment of the buildings. |
|
Период работы | январь 2005 — сентябрь 2006 (1 год 9 месяцев) |
Должность | Surveyor |
Компания | R.D. Policarpio & Co., Corp. |
Обязанности | Duties and Responsibilities:
In charge of project survey team.
Conducts as stake survey.
Verify accuracy of vertical and horizontal controls.
Compute all the survey data gathered from the field.
Plan and layout project limits.
Compute areas and volume.
Provide control elevations and center line (blue toppings)
Conducts survey for possible variation orders.
Ensure accurate lay-out of string line for finished elevations.
Certify quantities submitted for billing.
Conduct as-built survey.
Submit monthly all survey data to the office engineer for transmittal to the
chief surveyor.
Maintain and submit all survey records (field book).
Proper safekeeping and proper handling of the survey equipments.
Observe proper implementation of company policy and safety/environmental
guidelines.
CIVIL ENGINEER
Structural / Geotechnical / Hydrological
facebook.com/engrerrian.tang |
Образование
|
Образование | Высшее |
Окончание | 2005 год |
Учебное заведение | Holy Angel University |
Специальность | Bachelor of Science in Civil Engineering |
Дополнительная информация
|
Иностранные языки | Английский (Свободный) |
Владение компьютером | Продвинутый пользователь |
Курсы и тренинги | Precast Concrete Off-Site Construction Techniques & Case Studies
PCI - Precast/Prestressed Concrete Institute
June 26, 2016
Seismic Time-History Analysis in RM Bridge V8i
Bentley Institute
July 13, 2016
Gravity and Lateral Static Loadings V8i
Bentley Institute
April 20, 2016
Fundamental of Analysis and Design for Instability V8i
Bentley Institute
January 26, 2016
Rewriting The Fabric Structures Specs: Technical Advances in Fabric
Building Design
Civil + Structural Engineer
October 12, 2015
Unite Your Team for Better Performance
Civil + Structural Engineer
October 06, 2015
Innovation in Seismic Design of Industrial Structures and Piping - Post
Fukushika 2011
Civil + Structural Engineer |
Навыки и умения | Staad.Pro / StaadFoundation
Ram Structural System
Ram Concept
Ram Connection
RM Bridge
GeoStructural - Geo5
Abaqus (Multiphysics)
Prostructure - Concrete and Steel
Detailing
AECOsim Building Designer (BIM)
Microstation (CAD)
LumenRT (Rendering)
AutoCad
Autodesk Quantity Takeoff
Office & Microsoft Project
Microsoft Visual Studio (Visual Basic)
PTC Mathcad
SewerGems |
